#NODAPL: How to block trainz


https://submedia.tv/stimulator/2016/12/13/nodapl-how-to-block-trains/

Trains are one of the main ways that oil is transported across Turtle Island. Physical blockades of the tracks have been used effectively many times to hamper ecocidal projects of “resource extraction”.

We can also block the rails in a sneaky way: by tricking the signalling system into thinking there is a train on the tracks. This trick will force train traffic to come to a halt until the signal blockage is cleared. It can be done in under a minute, and repeated many times to have a significant impact on train circulation. It can take hours to find and remove this blockage, stopping all train traffic in the meantime.

Here’s how their system works:
A low velocity current runs through each rail. The electricity runs across the junctions of an individual rail with copper wire connections. When a train passes, it forms an electrical connection between rails and signals its presence.

Here’s how we can block the signal:
Get some 6-gauge booster cables. You can paint the wire black to make it harder to find. Rust on the tracks can prevent a solid connection, so connecting directly to the tracks might not work. To avoid this problem, find a section of rail where two junctions are side by side, and connect the copper wires with the booster cable. You can hide the wire with snow or rocks. The connection will lower railway crossing barriers that are nearby.

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s